EBAY is the very best place for memorabilia and collectible-type items due to competive pricing and the large selection of items available. Looking for a bargain? Browse through these current listings on Top Beer Cans to find your best price for Top Beer Cans. Didn"t find what you were looking for? Search EBAY for other CORONA MERCHANDISE.

Simple Guide on How to Make a Beer Pong Table

Beer Pong is a game commonly played in college areas. The table is the biggest and most important part of the game. There are no official rules for beer pong and the ones that are used alter significantly from coast to coast, state to state and college to university. Check the rules that others in your area follow before starting construction of your table. Need design ideas-you may wish to check out www.BeerPongNation.net for pictures of some of the best custom beer pong tables.

Things you'll need :

*Table
*Plywood
*three 2-by-4 inch boards
*Paint or whatever you want to use to decorate or customize the table
*Waterproof sealer

Follow these straightforward steps to build your custom beer pong table.

1.Take a well ventilated area such as a warehouse and clear it. Find a table to use as a base. This can either be a table that you are already using, such as a kitchen table, or you can purchase a cheap folding table for just this purpose.

2. Cut the plywood to the right measurements for the beer pong table. Technically, there are no official rules for the game of beer pong so the measurements of the table can change greatly from area to area. The typical size is 8 by four feet.

3. Adjust the peak of the table. Cut at least three pieces of 2-by-4 or 4-by-4 to the same width of your table. Lay the boards equally across the table. You can stack and nail many pieces of 2-by-4 in order to get the proper height that is required by the rules of your area. Again, the guidelines change greatly so the height may be anywhere from 27.5 to forty five inches.

4. Draw boundaries on the plywood top. There are often three lines that are required by most rules : The mid line that divides the table in half, and the foul lines that are a foot from the edge of each side of the table.

5. Decorate the plywood. You can use paint, bottle caps or anything else you want to customize the surface of your table. This is your chance to customize your table.

6. Water-proof the plywood. It is best to cover the surface of the table in a water-resistant sealer in order to protect the wood from water damage. This will protect the wood and make sure that your table lasts better.

7. Set up the table you are using as a base, place the set of three 2-by-4 boards uniformly across the table and place the plywood on top. This sets up the beer pong table for playing.

What you just learned about Building Beer Pong Tables is just the beginning. To get more ideas, read stories, check out pictures and videos go to Beer Pong Nation or Beer Pong.

You may also want to check out Huge Beer Belly at Beer Belly Nation

.

About the Author

Jack Spenelli is the creator of http://www.BeerPongNation.net, the #1 site on the web for Beer Pong. Check out Beer Pong pics, blogs, videos and more.

Questions & Answers about Top Beer Cans

Why do people tap the top of their soda cans?

I've seen a few people click or tap the top of a soda can or some have said with beer bottles but I haven't any idea as to why?

I do it so that Shakira will appear from the can and shake her ass in front of me.

Where can I find a 2-part epoxy resin in Canada?

My friends and I are building a coffee table and filling the top with beer caps, we have the table built but haven't located a good clear 2-part epoxy resin to use to seal the caps in the top. Does anyone know where I can buy some, or what brands are the best?

If it's like the US, you can find small bottles of regular epoxy resin at craft, hobby and art supply stores (do not buy an epoxy resin that calls itself a "casting" epoxy resin or a floral setting resin... those won't cure as hard as a regular epoxy resin).

Hardware stores may carry epoxy resin in larger amounts (ask them for "bartop resin") and for less money that smaller volumes would cost.
Here one brand is called "Glaze Coat" by Famowood.

You may want to check out some of the links on this page at my site for more info on brands of epoxy resin, etc, and using it to coat things, including larger surfaces:

http://glassattic.com/polymer/other_materials.htm

(CLICK ON the category called "Brands" then scroll down a screenful or two for larger surfaces)
...and you'll find even more info specifically on using it as a covering on a large surface like a table at YouTube, or various other places online.

HTH,

Diane B.

Top Beer Cans - A You Tube Video

Men at work: Land down under!!!! (One of their best songs!!)

Other Important Information - Top Beer Cans

I hope you have found the information on Top Beer Cans useful. Please BOOKMARK this site and return often to view new listings for CORONA BEER COLLECTIBLES. THANK YOU!